| Parameter | Specification |
|---|---|
| Capacity | 3 KVA to 2000 KVA |
| Input Voltage | 170-270V (1PH) / 295-465V (3PH) |
| Output Voltage | 230V (1-Phase), 400V (3-Phase), Adjustable from front panel |
| Nature of Cooling | Forced Air Cooling with Redundant Fans (Natural Cooling Optional) |
| Output Voltage Regulation | ±1% (Adjustable up to ±5%) |
| Efficiency | >95% |
| Input Frequency | 50 Hz ± 5% or 60Hz ± 5% |
| Effect of Load Power Factor | Independent of inductive and capacitive loads; supports 0.8 lagging to 0.8 leading PF |
| Speed of Correction | 100V/Sec |
| Display Type | 2 x 16 LCD Digital Display |
| Displayed Parameters | Input Voltage, Output Voltage, Load %, Input Power, Alarms & Status Messages |
| Protections | Short Circuit, Over Voltage, Under Voltage, Over Temperature, Overload, Fan Failure, SCR Failure |
| Control Design | Micro Controlled DSP (Digital Signal Processor) Based Controller |
| Operating Temperature | -10°C to +40°C |
| Manual Bypass | Available – Mechanical Manual Bypass Selector |
| Front Panel | LCD Display, Menu Selection Keys, Parameter Adjustment Buttons |
| Waveform Distortion | Same as Input (No Additional THD Introduced) |
| Enclosure | Indoor Type, IP20, RAL 7035 |
| Reset | Automatic Recovery after Fault Clearance / Alarm Reset through Controller |
| Event Recorder | Last 250 Events Storage and Retrieval |
| Connections | RS-232, RS-485, TCP/IP (Optional) |
| Standard | EN 50091-1 (Safety), EN 50091-2 (EMC) |
Note: Specifications are subject to change without notice due to continuous R&D. Customization is available on request.